|
LASERKERF
|
|
| Patent Pending | ||
21st
CENTURY LASER TECHNOLOGY FOR YOUR SAW |
||
| Saw list and installation photos | Have a question call, 859-494-0790 or e-mail |
The number of saws manufactured in the last 15 years is massive so we cannot define every installation so we have given various types of installations below. If you do not find a similar saw or are not sure if the Laserkerf will fit your saw just e-mail us and we will try to find a picture of your saw to help you make a decision.
The Laserkerf comes in 2 different beam widths
Beam Width: Model 100 is for thin kerf or for blades
from .092" to .109" wide
Model 125 is for standard kerf or .125" wide.
Power sources: The Laserkerf II comes with both an AC and DC power source. 2AA batteries are used in the battery pack. The AC supply has reaches approximately 6 feet.
Follow the following two steps to see which laser and
bracket would be best for you.
First: Review the saws listed below to determine how the Laserkerf
will be mounted to your saw. Bracket information and photos
of specific saw installations are located below. Additional
information will be listed as soon as it is available on our web site.
Second: Cut a kerf in a piece of wood and measure the width of the kerf. Measuring the blade is not as accurate as measuring the kerf. Thin kerf's, of 3/32 or .100", use model 100. Standard kerf's, of 1/8 or .125", use model 125. If you switch blades for various projects the model 125 is recommended.
Third: Go to the shopping cart and select the laser and bracket for check out.
| To see the Laserkerf attached to the saws below click on the link. | ||
| Saw Model | Bracket | Comments |
| B&D 3680 | B-2 | Attached to the back of the black blade guard. Similar to the Dewalt 705 below. Use Model 100 or 125 Laserkerf. Shopping Cart |
| B&D 1703 or 1703-1 | Will not fit | |
| Bosch 3912 | B-2 | Attached to the back of the black blade guard. Similar to the Dewalt 705 below. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Bosch 3915 | B-2 | See link, use Model 100 or 125 Laserkerf. Shopping Cart |
| Bosch 3924 | B-2 | Attached to the back of the black blade guard. Similar to the Dewalt 705 below. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Bosch 4212 | B-5 | Similar to the Dewalt 708 type 4 , use model 100 or model 125. Shopping Cart |
| Bosch 4410 | W-1 | See the horizontal way tube installation, Use either a model 100 or 125 Laserkerf. Shopping Cart |
| Bosch 4412 | W-1 | See the horizontal way tube installation, Use either a model 100 or 125 Laserkerf. Shopping Cart |
| Bosch 5412L | W-1 | See the horizontal way tube installation, Use either a model 100 or 125 Laserkerf. Shopping Cart |
| Bosch GMS 10 | W-1 | See the horizontal way tube installation, Use either a model 100 or 125 Laserkerf. Shopping Cart |
| Chicago 41168 slider | W-1& B-8 | Similar to Chicago 45885, B-8 is added to make a flat surface on the bottom of the saw. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Chicago 42818 slider | W-1& B-8 | Similar to Chicago 45885, B-8 is added to make a flat surface on the bottom of the saw carriage. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Chicago 42624 | B-16 | Similar to Sears Sears 10" left mount below. The plastic chip chute may need to be removed. Use a Model 100 or 125 Laserkerf. Shopping Cart |
| Chicago 45885 Slider | W-1& B-11 | B-11 is added to make a flat surface on the bottom of the saw. See link, use Model 100 or 125 Laserkerf. Shopping Cart |
| Chicago 90861 | W-1 | Attaches similar to the Makita LS1013 , use Model 100 or 125 Laserkerf. Shopping Cart |
| Chicago 90891 | W-1 | Attaches similar to the Makita LS1013 , use Model 100 or 125 Laserkerf. Shopping Cart |
| Delta 33-830 RAS | none | Attaches to the front of the blade guard just to the left of the kick back. Shopping Cart |
| Delta 33-890 | B-14 | Similar to Dewalt 770, use a model 125 for standard kerf or a model 100 for a thin kerf blade. Shopping Cart |
| Delta 36-070 | Laserkerf will NOT fit | |
| Delta 36-075 | Laserkerf will NOT fit | |
| Delta 36-085 | Laserkerf will NOT fit | |
| Delta 36-090 | Laserkerf will NOT fit | |
| Delta 36-210 | Laserkerf will NOT fit | |
| Delta 36-220 type 2 and 3 | Will not fit |
|
| Delta 36-225 | Laserkerf will NOT fit | |
| Delta 36-230 | B-16 | Same as Delta 36-235. Shopping Cart |
| Delta 36-235 | B-16 | Use Model 100 or 125 Laserkerf. Shopping Cart |
| Delta 36-240 | W-1& B-8 | Similar to Chicago 45885 Slider, B-8 is added to make a flat surface on the bottom of the saw. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Delta 36-250 | W-1& B-8 | similar to Chicago 45885 Slider, B-8 is added to make a flat surface on the bottom of the saw. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Delta 36-255 | B-16 | Use Model 100 or 125 Laserkerf. See link for installation pictures. Shopping Cart |
| Delta 36-312 | B-18 | Use Model 100 or 125 Laserkerf. See Delta 36-412 for installation pictures. Shopping Cart |
| Delta 36-412 | B-18 | Use Model 100 or 125 Laserkerf. See link for installation pictures. Shopping Cart |
| Delta 36-585 | Will not fit | |
| Delta MS 250 | Laserkerf will NOT fit | |
| Delta MS275 | Laserkerf will NOT fit | |
| Delta MS450 | B-18 | Installation is similar to the Porter Cable 3802. Use a model 100 for thin kerf or model 125 for standard kerf. Shopping Cart |
| Delta RAS RS380 12 33-200 33-201 33-205 33-215 33-216 33-230 33-231 33-830 33-975 33-975C 33-990 33-990C |
B-15 | Side kick back mount The B-15 bracket is attached to the kick back after the dogs have been removed. See link to the left. This should only be installed in this manner if the saw is no longer used to rip lumber. The Laserkerf is attached to the bracket.Use either the model 100 for thin kerf or the model 125 for standard kerf. Shopping Cart |
| Delta RAS Deluxe 105 Plus 10 Plus 105 Super 900 Super 990 Super 990-10 30C 40C 50C 33-061 33-062 33-063 33-071 33-072 33-073 33-081 33-082 33-083 33-267 33-268 33-361 33-362 33-363 33-400 33-401 33-402 33-403 33-410 33-411 33-412 33-413 33-420 33-421 33-422 33-423 33-760 33-761 33-762 33-763 33-764 33-371 33-372 33-373 33-381 33-382 33-383 33-770 33-771 33-772 33-780 33-781 33-782 33-783 33-784 33-790 33-791 33-792 33-793 33-890 33-891 33-892 33-893 33-894 33-895 |
B-14 | Similar to Dewalt 770, the bracket is attached to the side of the upper blade guard next to the kick back. The Laserkerf is attached to the bracket. Shopping Cart |
| Delta SM100M | Will not fit | |
| Dewalt 700 | Laserkerf will NOT fit | |
| Dewalt 701 | Will not fit | |
| Dewalt 703 | B-9 | Attached to the back of the black blade guard, see link. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Dewalt 704 | B-2 | See Dewalt 705, use Model 100 or 125 Laserkerf. Shopping Cart |
| Dewalt 705 | B-2 | Attached to the back of the black blade guard, see link. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Dewalt 706 | None | Attached to the back of the black blade guard. Similar to the Protech below. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Dewalt 707 | Will not fit | |
| Dewalt 708 | B-2 | Attached to back of blade guard, see link. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Dewalt 708 type 4 | B-5 | Attached to back of blade guard, see link. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Dewalt 712 | W-1 | See the horizontal way tube installation.Use a Model 100 or 125 Laserkerf. Attached to the bottom of the cross bar at the end of he tubes. Shopping Cart |
| Dewalt 715 | B-2 | Attached to the back of the black blade guard, see Dewalt 705. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Dewalt 716 | B-2 | Attached to the back of the black blade guard, see Dewalt 705.. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Dewalt 718 | B-20 | Use Model 100 or 125 Laserkerf, see link.Shopping Cart |
| Dewalt 770 Radial arm saw | B-14 | Use a model 125 for standard kerf or a model 100 for a thin kerf blade. Shopping Cart |
| Dewalt 925 | B-14 | Similar to Dewalt 770, use a model 125 for standard kerf or a model 100 for a thin kerf blade. Shopping Cart |
| Dewalt 1030 & 1030K | B-14 | Similar to Dewalt 770, use a model 125 for standard kerf or a model 100 for a thin kerf blade. Shopping Cart |
| Dewalt 1400 | B-14 | Similar to Dewalt 770, use a model 125 for standard kerf or a model 100 for a thin kerf blade. Shopping Cart |
| Dewalt RAS T-1810 | B-14 | Similar to Dewalt 770, use a model 125 for standard kerf or a model 100 for a thin kerf blade. Shopping Cart |
| Freud TR215 | Laserkerf will not fit | |
| Hitachi C8FB2 | Will not fit | |
| Hitachi C10FS C10FSB |
W-1 | .Use a Model 100 or 125 Laserkerf. Attached to the bottom of the cross bar at the end of he tubes.Shopping Cart |
| Hitachi C10FA | Laserkerf will not fit | |
| Hitachi C10FCB | Laserkerf will not fit | |
| Hitachi C10FC or Hitachi C10FC2 | B-5 | Attached similar to the Rear mount 1 . Rear plastic blade guard will need to be removed. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Hitachi C10FCD | B-16 | Similar to Sears 10 left mount below. The plastic chip chute may need to be removed. Use a Model 100 or 125 Laserkerf. See Sears 10" left mount. Shopping Cart |
| Hitachi C12FSA | W-1 | Use either a model 100 or 125 Laserkerf. Attached to the bottom of the cross bar at the end of he tubes.Shopping Cart |
| Hitachi C12FDH C12 LDH |
The laser mounts on the back of the lower blade guard,see link.
Shopping Cart |
|
| Makita LS1000 | B-2 | Attaches to the back of the blade guard about 1/2" from the bottom, similar to the Bosch 3915 use Model 100 or 125. The B-1 bracket is used to provide a flat mounting surface similar to the Dewalt 705. Shopping Cart |
| Makita LS1011 | W-1& B-8 | Similar to Makita LS1013 , B-8 is added to make a flat surface on the bottom of the saw. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Makita LS1013 | W-1 | See link, use Model 100 or 125 Laserkerf. Shopping Cart |
| Makita LS1013F | W-1 | Same as Makita LS1013 . Shopping Cart |
| Makita LS1020 | B-2 | Attached to the back of the blade guard, see Rear mount 1. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Makita LS1030 | Laserkerf will not fit | |
| Makita LS1030N | B-16 | Has not been tried but appears to have sufficient room to mount Model 100 or 125 laser. Shopping Cart |
| Makita LS1040 | B-16 | Has not been tried but appears to have sufficient room to mount Model 100 or 125 laser. Shopping Cart |
| Makita LS1211 | B-17 & W-1 | Use model 100 or 125. Shopping Cart |
| Makita LS1212 Makita LS1214 |
W-4 | Same as Makita LS1013 , use Model 100 or 125 Laserkerf. Shopping Cart |
| Makita LS1220 Makita LS1221 |
B-12 | Similar to the Ridgid MS1250. use Model 100 or 125 Laserkerf. Shopping Cart |
| Makita LS1430 LS1440 |
none | Attach to the back of the black blade guard. Similar to Bosch 3915, use Model 100 or 125 Laserkerf. Shopping Cart |
| Makita LS711DWBEK | W-1 | Same as Makita LS1013 , use Model 100 or 125 Laserkerf. Shopping Cart |
| Makita LS0714 | W-1 | Sinilar to the Hitachi C10FS, please use this link to see where it will mount. Shopping Cart |
| Makita 2403 | Will NOT fit | |
| Milwaukee 6490 | Will NOT fit | |
| Milwaukee 6496 slider | W-1 | Attaches similar to the Makita LS1013 , use Model 100 or 125 Laserkerf. Shopping Cart |
| Protech CS72121 | None | See link, use Model 100 or 125 Laserkerf. Shopping Cart |
| Protech 7208 | B-5 | Attached to the back of the blade guard, see Rear mount 1. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Performance Power Pro PP250MS | W-1 | Attaches similar to the Makita 1013, use Model 100 or 125 Laserkerf. Shopping Cart |
| Porter Cable 3802 | B-16 | Use Model 100 or 125 Laserkerf. See link for installation pictures. Shopping Cart |
| Porter-Cable 3807 | W-1 & B-8 | Similar to Chicago 45885, B-8 is added to make a flat surface on the bottom of the saw. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Ridgid RS 1000 | B-3 or B-15 | B-3 bracket is attached to the splitter or attach bracket B-15 in place of the kick back dogs. Use either the model 100 for thin kerf or the model 125 for standard kerf. Shopping Cart |
| Ridgid MS 1050 | B-13 | Same as Ridgid MS1060.See link Use Model 100 or 125 Laserkerf. Shopping Cart |
| Ridgid MS1060 | B-13 | See link Use Model 100 or 125 Laserkerf. Shopping Cart |
| Ridgid MS1065LZ | Will not fit | |
| Ridgid MS1250 & MS1250-1 MS1250-2 |
B-6 | See link, use Model 100 or 125 Laserkerf. Shopping Cart |
| Ridgid MS1250LZ | B-19 | Similar to Sears 10 left mount below. The plastic chip chute may need to be removed. Use a Model 100 or 125 Laserkerf. See Sears 10" left mount. Shopping Cart |
| Ridgid MS1290 or 1290LZ | W-1 | See link, use Model 100 or 125 Laserkerf. Shopping Cart |
| Rockwell and or Delta RAS RS380 12 33-200 33-201 33-205 33-215 33-216 33-230 33-231 33-830 33-975 33-975C 33-990 33-990C |
B-15 | Side kick back mount The B-15 bracket is attached to the kick back after the dogs have been removed. See link to the left. This should only be installed in this manner if the saw is no longer used to rip lumber. The Laserkerf is attached to the bracket.Use either the model 100 for thin kerf or the model 125 for standard kerf. Shopping Cart |
| Rockwell and or Delta RAS Deluxe 105 Plus 10 Plus 105 Super 900 Super 990 Super 990-10 30C 40C 50C 33-061 33-062 33-063 33-071 33-072 33-073 33-081 33-082 33-083 33-267 33-268 33-361 33-362 33-363 33-400 33-401 33-402 33-403 33-410 33-411 33-412 33-413 33-420 33-421 33-422 33-423 33-760 33-761 33-762 33-763 33-764 33-371 33-372 33-373 33-381 33-382 33-383 33-770 33-771 33-772 33-780 33-781 33-782 33-783 33-784 33-790 33-791 33-792 33-793 33-890 33-891 33-892 33-893 33-894 33-895 |
B-14 | Similar to Dewalt 770, the bracket is attached to the side of the upper blade guard next to the kick back. The Laserkerf is attached to the bracket. Shopping Cart |
| Ryobi TS251U | Will not fit | |
| Ryobi TS-254 or TS-254DX |
Attach to the back of the black blade guard, use Model 100 or 125 Laserkerf. Similar to Sears 10" miter . Shopping Cart | |
| Ryobi 260 | Will NOT fit | |
| Ryobi TS1342 | B-2 | This application has not been verified but we believe it will fit. Use either a model 100 or model 125. Shopping Cart |
| Ryobi 1350 | B-2 | Attach to the back of the black blade guard, use Model 100 or 125 Laserkerf. Similar to Sears 10" miter . Shopping Cart |
| Ryobi TS1352DXL | B-2 | Attach to the back of the black blade guard, use Model 100 or 125 Laserkerf. Similar to Sears 10" miter . Shopping Cart |
| Ryobi TS1550 | B-6 | See link, use Model 100 or 125 Laserkerf. Shopping Cart |
| Ryobi TS1551DXL | B-16 | Similar to Sears 10 left mount below. The plastic chip chute may need to be removed. Use a Model 100 or 125 Laserkerf. See Sears 10" left mount. Shopping Cart |
| Ryobi TS1552DXL | B-16 | Similar to Sears 10 left mount below. The plastic chip chute may need to be removed. Use a Model 100 or 125 Laserkerf. See Sears 10" left mount. Shopping Cart |
| Ryobi TS1553DXL | B-16 | Similar to Sears 10 left mount below. The plastic chip chute may need to be removed. Use a Model 100 or 125 Laserkerf. See Sears 10" left mount. Shopping Cart |
| RYOBI 1830SC | W-1 | Same as Ridgid MS1290. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Sears 8" slider 113.234880 113.234920 113.234940 |
W-1 | See the horizontal way tube installation, Use either a model 100 or 125 Laserkerf. Shopping Cart |
| Sears 10" miter
315.212100 315.212040 315.212110 315.235380 315.243000 |
B-2 | See link, use Model 100 or 125 Laserkerf. Shopping Cart |
| Sears 10" miter 900.234811 |
none? | May not fit Attached to the back of the blade guard, see Rear mount 1. Use Model 100 or 125 Laserkerf. Shopping Cart |
Sears
miter left mount |
B-16 | See link, use Model 100 or 125 Laserkerf. Shopping Cart |
| Sears
12" Slider 21292 /137.212920 |
None | See link, Use Model 100 or 125 Laserkerf. Shopping Cart |
| Sears 12" slider 137.212060 137.212070 |
W-1 | See link, use Model 100 or 125 Laserkerf. Shopping Cart |
| Sears 12"
315.212220 |
B-16 | See link, use Model 100 or 125 Laserkerf. Shopping Cart |
| Sears Craftsman 113.234600 113.234630 113.234651 113.243680 |
B-5 | Attached to the back of the blade guard, see Rear mount 1. Use Model 100 or 125 Laserkerf. Shopping Cart |
Sears Craftsman 113.235221 |
B-13 | See Ridgid MS1060 above. Use a Model 100 or 125 Laserkerf. |
| Sears Craftsman Radial arm saw 113.196321 113-196380 113.196420 113.196421 113.198251 113.198410 315.220380 315.220381 |
B-3 or B-15 |
B-3 bracket is attached to the splitter. Use either the model 100 for thin kerf or the model 125 for standard kerf. Shopping Cart |
| Sears Craftsman Radial arm
saw 113.190060 113.190600 113.19760 113.19770 113.19771 113.197110 113.197250 113.197601 113197610 113.197750 113.197751 113.198111 113.199200 113.199250 113.199300 113.23100 113.23110 113.23301 113.234700 113.29410 113.29510 |
B-15 | Side kick back mount The B-15 bracket is attached to the kick back after the dogs have been removed. See link to the left. This should only be installed in this manner if the saw is no longer used to rip lumber. The Laserkerf is attached to the bracket.Use either the model 100 for thin kerf or the model 125 for standard kerf. Shopping Cart |
| Sears Craftsman Radial arm saw 113.29003 113.29350 113.29401 113.29411 113.29430 113.29441 113.29500 113.29520 |
B-14 | Similar to Dewalt 770, the bracket is attached to the side of the upper blade guard next to the kick back. The Laserkerf is attached to the bracket. Shopping Cart |
| Sears Craftsman Radial arm saw 113.29461 |
B-21 | The bracket attaches to the stud that supports the kick back. Shopping Cart |
Sears Craftsman |
May not fit, please contact us at 859-494-0790. | |
| Skill HD3812 | B-2 | Similar to Dewalt 705, see link above. Use a Model 100 or 125 Laserkerf. Shopping Cart |
| Skill 3810 | none | Attaches to the back of the upper blade guard. See Bosch 3915 for a similar installation.Use either the model 100 for thin kerf or the model 125 for standard kerf. |
| Superior CMS12 | none | Similar to the Dewalt 706 . Attached to the back of the black blade guard. . Use Model 100 or 125 Laserkerf. Shopping Cart |
| Tool Shop 12" model J1Z-ZP-305 | B-2 | See Dewalt 705. Use Model 100 or 125 Laserkerf. Shopping Cart |
| Tradesman 8322 8329N |
B-16 | See Sears 10" left mount, use Model 100 or 125 Laserkerf. Shopping Cart |
| Taskforce M3053LW |
none | Similar to the Dewalt 706 . Attached to the back of the black blade guard. . Use Model 100 or 125 Laserkerf. Shopping Cart |
| Taskforce 2051LW |
none | Similar to the Dewalt 706 . Attached to the back of the black blade guard. . Use Model 100 or 125 Laserkerf. Shopping Cart |
| Item | Cost $ (USD) | Product | Description |
| Model 100 | 59.00 |
|
Laserkerf
kit includes: Model 100, which is 1.375" square and .625
thick. it should be use on saws with thin kerf blades meausring
from .092" to .109", |
| Model 125 | 59.00 |
|
Laserkerf kit includes: Model 125, which is 1.375" square
and .625 thick. it should be use on saws with standard kerf blades
meausring from .110" to .125" AC power source with 6' detachable cord on/off switch DC power source, 2AA batteries, 2 cable clamps 3 tie wraps Shopping Cart |
| Thank you for visiting Laserkerf.com | ||